Swiss Sim Shop is an eBay store dedicated to selling used real aircraft parts. This is where I located my Ipeco 737 Pilot Seat. Their warehouse is located in Tempe, AZ and I paid them a visit. This article contains my experience there.
Click the button above for the full article!
I have finally installed my Simujabs Rudder Pedals to compliment my Simujabs Yoke. The delay was due to a little bit of customization to fit under the JetMax, and I explain this in my full review article.
Click the button for the review!
As I only run a single HDTV for visuals, I wanted to have the ability to look around the environment. I was able to configure my yoke’s custom hat switch to do this with FSUIPC. I wrote this article to document the process I followed.
Click the button above for the full article!
By using the JetMax 737, I only have 2/3rd of the main instrument panel. I wanted to include my Flight Officer’s EFIS, sixpack, and GPWS switches into the JetMax. I wrote up this article on how I built a custom panel for this hardware.
Click the button above for the full article!
My Simujabs Yoke did not come with a clipboard on it, so I bought my own from Agronn. I also put together a quick review of this excellent product.
Click the button for the review!
While building my home cockpit, I found there are many suppliers of replica 737 control column yokes. I created this article to document the data I found and the selection I made.
Click the button above for the full article!
After a long wait, I have received and installed my Simujabs Single Yoke Control Column. I put together a full write up of course; I hope you enjoy it!
Click the button for the review!
